School Project.mp4: Wifi

Remove the bottom of the can completely. Cut almost all the way around the top, leaving a small piece attached to act as a "hinge".

Investigate which common household objects are the biggest "Wi-Fi killers" by measuring signal drop through different materials. Wifi School project.mp4

Perform a speed test before and after to see if the signal strength (measured in % or dBm) increases. 2. The Science Experiment: Signal Interference Remove the bottom of the can completely

To create a compelling school project video for "Wifi School project.mp4," you can choose from three main approaches: a , a scientific experiment , or an educational explainer . 1. The DIY Build: Wi-Fi Signal Booster Perform a speed test before and after to

Cut the cylinder of the can vertically down the middle and pull the sides open to create a curved, radar-dish shape.

Place a device (like a phone) a set distance from the router and record the baseline signal strength.

Use a "parabolic reflector" made from household materials to direct Wi-Fi signals that usually spread in all directions. Materials: