Unit Usp 1020d Instruktsiia 🎁 Trusted

Connect a compatible 6V AC adapter into the DC port on the side of the device. ⚠️ Note: Do not use both simultaneously. 2. Setting Date and Time

Before taking your first measurement, ensure the device is configured correctly. 1. Power Supply

If you have specific like dizziness or frequent high readings, unit usp 1020d instruktsiia

Sit upright in a chair with your back supported and feet flat on the floor. Cuff Placement: Place the cuff on your bare left arm. Position it about 1–2 cm (0.5 inches) above the elbow. The air tube should run down the center of your inner arm. 🩺 Taking a Measurement Press the START/STOP button.

Open the battery compartment on the bottom. Insert 4 AA batteries, ensuring correct polarity (+/-). Connect a compatible 6V AC adapter into the

4 x AA Batteries (or AC Power Adapter, depending on the bundle) 1 x Instruction Manual & Warranty Card 1 x Storage Case ⚙️ Device Setup

Press the SET button while the device is off to toggle between User 1 and User 2. Setting Date and Time Before taking your first

Press the MEM button. It will first show the average of the last 3 readings. Press it again to scroll through previous entries.