Sushka Pilomaterialov Shema -

Spacers must be placed vertically one above the other to prevent the timber from bending under its own weight. 2. The Drying Cycle (Phases)

Industrial drying schemes, particularly in convective kilns, generally consist of four main stages:

Timber is stacked under a roof or canopy. It is cost-effective but slow and dependent on weather conditions. sushka pilomaterialov shema

Before drying begins, timber must be sorted by thickness and species. The most important part of the scheme is the :

Temperature is gradually increased while humidity is lowered. This creates a pressure gradient that moves moisture from the center of the plank to the surface. Spacers must be placed vertically one above the

The drying of sawn timber () is a critical industrial process designed to remove excess moisture from wood while maintaining its structural integrity and preventing defects like warping or cracking. A standard drying scheme typically follows a structured technical workflow: 1. Preparation and Stacking

The timber is heated in a high-humidity environment to warm the core of the wood without evaporating surface moisture too quickly, which prevents surface hardening. It is cost-effective but slow and dependent on

Once the target moisture content is reached (typically 8–12% for joinery), the wood is held at a specific temperature to equalize moisture throughout the board.