P1074464_wt.7z Now

: If a specific area requires no taper, try entering a value of "0" for the draft in that section to maintain verticality while drafting surrounding faces.

If the standard feature fails (which often happens on complex surfaces like fenders or casting pockets), consider these professional workarounds: p1074464_wt.7z

: Often used for more complex geometry, this method allows you to use a specific edge or curve as the split point for the draft. This is highly recommended for parts with non-planar divisions. : If a specific area requires no taper,

Based on community discussions regarding similar drafted features, here is how you can effectively apply a draft: p1074464_wt.7z