Nano10.rar

Your PC’s IP address must be in the same range (e.g., 192.168.1.10 ) for the initial setup. If your router uses 192.168.0.x , you must temporarily change your PC's IP to the .1.x range to access the PLC's configuration page and update its address. 3. Basic Programming (i-TRiLOGI) Once the software is running and the hardware is connected:

Run the extracted .jar or .exe file (often named TRiLOGI.exe ) to launch the programming environment. 2. Hardware Connectivity To communicate with the

Click "Transfer" > "To PLC" to upload your code. You will need to enter the PLC’s IP address and potentially a password (default is usually blank or 8888 ). 4. Advanced Features Web Control: The

Below is a guide for extracting and setting up the software typically found within this archive. 1. Extraction and Software Installation