: Release the button and wait for the process to hit 100%. The device will reboot automatically once finished.
: Continue holding until the front panel display shows "USB" or "BOOT" and starts counting up (e.g., U01 , U02 ). ШЄШЩ…ЩЉЩ„ m4evo GxRom bin
: Power off the receiver completely from the back or unplug it. Step 2 : Insert the USB drive into the receiver's port. : Release the button and wait for the process to hit 100%
What is your device having (e.g., stuck on "BOOT")? Do you have the remote control or a USB drive? : Power off the receiver completely from the
: Use a USB stick formatted to FAT32 . Place the GxRom.bin file in a folder named files on the root of the drive (e.g., USB:\files\GxRom.bin ). 🛠️ How to Flash (Recovery Mode)
💡 : Do not disconnect the power during this process, as it can permanently damage (brick) the hardware. If you're having trouble, tell me: