2.2 | Bale Band V

: Set the strapping quantity to "1" on the iBand-It App and run the machine until it indicates it is out of strapping at Position 0.

: Bales are sequentially loaded into the stacking chamber. Bale Band v 2.2

: Keep hydraulic systems clean and repair leaks immediately to prevent contamination. Standard Sequence of Events : Set the strapping quantity to "1" on

: Place the new spool; this is recommended as a two-person operation . Standard Sequence of Events : Place the new

Before beginning, ensure the machine is in the correct state to prevent software or mechanical errors.

: The back gates open, and the bundle exits the machine while the cycle resets. Operator's Manual - Bale Band-It

: Inside the electrical boxes, red LEDs indicate active inputs. For example, photo eye LEDs (inputs #10, 11, and 12) stay on when no bale is present.