A_feladat_1_start.pkt «OFFICIAL · 2026»

: Use the ping command from a PC's command prompt to test connectivity to other devices. 4. Troubleshooting Checklist If connectivity fails (pings do not succeed):

: Set using hostname [Name] in global configuration mode. Passwords : Enable secret password: enable secret class . A_feladat_1_start.pkt

Every router and switch in the topology typically requires these initial settings: : Use the ping command from a PC's

Console password: line con 0 , then password cisco and login . VTY lines: line vty 0 4 , then password cisco and login . Passwords : Enable secret password: enable secret class

: Set a "Message of the Day" using banner motd #Unauthorized Access Prohibited# . 2. IP Addressing

: On routers, enter interface configuration mode (e.g., interface g0/0 ), set the address ( ip address [IP] [Mask] ), and enable it with no shutdown .

: On switches, configure interface vlan 1 with an IP address and no shutdown . 3. Routing and Connectivity